2.00 and later
On the main screen of all the modules is a logo. This logo can
be changed. The idea is that it is set to the logo of the dealer,
or supplier, of the system. The goal of this document is to explain
the requirements for changing the logo.
You will need to supply 2 graphic files, in Bitmap (BMP) format.
The first graphic
file should be called xxx1.Bmp and must use no more
than the standard 16 colors. xxx3.Bmp should be a similar
bitmap, but can contain an unlimited number (24 bit) colors.
xxx should be replaced with a unique name (no more than
6 characters) for the dealer concerned.
The bitmaps must measure 262 pixels, by 142 pixels.
The bitmaps must be placed in the
Data
directory on the client's machine.
To set the bitmap, go to the TNA2000 Ini file and change the Logo
setting. Insert the new name here (xxx) without the trailing
number or the .Bmp extension. For example, for a bitmap
set called cbs1.bmp and cbs3.bmp you would enter
Logo=Cbs
Notice there are no spaces.
If you send your logo bitmap files to tna2000@capesoft.com, then
we will include the bitmaps into TNA2000 as resources. This
means the files are automatically part of TNA 2000, and you will
not need to ship them. If you want to set the INI file to use
an internal bitmap, then prefix the name with a tilde (~).
For example the above example would become:
Logo=~Cbs |
