Ini Settings
BackupWarning : Yes / No. Defaults to Yes. If No then suppresses
the
Backup suggestion when the User Module is closed.
Logo : This controls the logo which appears on the background window.
Login : A default value for the Login Code.
Password : A default value for the
password.
If the login and password are both valid, then the login screen
will not be shown.
DataPath : The full path to the
Data
Files
NetPath : The full path to the Program Files, on the Server.
LocalPath : The full path to the Program Files, on the WorkStation.
Language : The name of the Language
file.
Defaults to English.Tra
Jumpstart : Yes / No. If set to Yes the Jumpstart window will
open when the User module is opened.
LeaveApproved: 1 = Pending, 2 = Approved, 3 =
Not Approved. Sets the default leave approval
status when adding a leave record.
ForceSendCard: 1 will send an employee update
to online clocks everytime the employee form is
closes, irrespective if the form was updated or
not.
Delay : The amount of time, in hundredths of a second, before the
Cue Card
will appear ( if Cue Cards are turned on.)
Timeout : Sets the TimeOut variable (in hundredths of a second)
for the Hardware Module. This controls the amount of time the hardware
module will take when communicating with the
Comms
Module. Defaults to 3000 ( i.e. 30 seconds).
Offline : If set to 1 then TNA 2000 goes into Offline mode. Primarily
this lets you set the Offline Poll Time in the Hardware Module.
Shortbreak : Enter a time here in hundredths of a second. I.e. 6000
= 1 minute. If a pair of
clockings
(Out / In ) are closer together then this time then they will be
ignored. This is used for toilet breaks, smoke breaks etc.
VisitorTwice : 0 / 1 : If 1 then visitors are allowed to
clock in more than once on the same card. The default (0) means
that employees
can only make 1 in, and 1 out clocking.
Fast: 1 enables server fast start
Web: 0/1 enables or disables the web server
Processor: 0/1 enables or disables the
processor
Reports: 0/1 enables or disables the report
engine
Comms: 0/1 enables or disables the comms
Email: 0/1 enables or disables the email server
Log: 0/1 enables or disables logs
Real: 0/1 enables or disables the real time
server
WebServerPort: Sets the overriding web server
port
|
